DRV8353: Status Register: GDF, SA_OC AND SC_OC

I used the FOC algorithm to control the motor, and the motor was able to operate normally. However, due to a misoperation, I swapped the sequence of the U and W lines and then powered on the motor. After a brief rotation, the motor stopped moving. I discovered that the sequence of the U and W lines was incorrect, so I restored the sequence to normal. When driving the motor again, it keeps reporting errors, and the error content does not include FAULT, GDF, SA-OC, and SC-OC.

Lydia：

您好，已经收到了您的案例，调查需要些时间，感谢您的耐心等待。

,

Alice：

您好，

guofa wang 说：When driving the motor again, it keeps reporting errors, and the error content does not include FAULT, GDF, SA-OC, and SC-OC.

确认一下，报错是FAULT, GDF, SA-OC, and SC-OC吗？