TI中文支持网
TI专业的中文技术问题搜集分享网站

CC3200 MQTT_Client例程 无法连接服务器,详细如下

Other Parts Discussed in Thread:CC3200

 [2020-10-31 16:01:16.850 R]
         *************************************************
            CC3200 MQTT_Client Application       
         *************************************************
[2020-10-31 16:01:17.510 R]

Host Driver Version: 1.0.1.11
Build Version 2.0.7.0.31.0.0.4.1.1.5.3.3
[2020-10-31 16:01:17.815 R]

Device is configured in default state 
[2020-10-31 16:01:17.920 R]

Started SimpleLink Device: STA Mode
[2020-10-31 16:01:18.636 R]

[WLAN EVENT] STA Connected to the AP: TP-LINK_511 , BSSID: b8:f8:83:f4:3d:f6
[2020-10-31 16:01:19.381 R]

[NETAPP EVENT] IP acquired by the device
[2020-10-31 16:01:19.970 R]
Device has connected to TP-LINK_511
Device IP Address is 192.168.1.160 
[2020-10-31 16:01:21.810 R]

Version: Client LIB 1.4.0, Common LIB 1.5.0.
C: Alloc for 1 2001dd34
[2020-10-31 16:01:22.466 R]

C:FH-B1 0x10 to net 16, Sent (161 Bytes) [@ 5]
C: Alloc for 0 2001dd34
[2020-10-31 16:01:22.551 R]

C: Rcvd msg Fix-Hdr (Byte1) 0x20 from net 16 [@ 5]
C: Msg w/ ID 0x0000, processing status: Good
C: RX closing Net 16 [4]
C: Cleaning session for net 16
Broker connect fail for conn no. 1 
[2020-10-31 16:01:23.546 R]

C: Net 16 now closed
disconnect from broker a1F8fKxfuZB.iot-as-mqtt.cn-shanghai.aliyuncs.com
 Exiting the Application

W WW:

不晓得是什么情况,以前一下子就连接上去了

,

Viki Shi:

请参考一下论坛类似问题:e2echina.ti.com/…/116820

,

W WW:

你好,这个例程看过很多次,没有想明白我这个问题

,

Viki Shi:

应该是那个服务器的问题,请参考下上文我贴出的链接,尝试下里面的方法

赞(0)
未经允许不得转载:TI中文支持网 » CC3200 MQTT_Client例程 无法连接服务器,详细如下
分享到: 更多 (0)