TI中文支持网Part Number:C-GANGOther Parts Discussed in Thread:MSP430G2332, , MSP430FR5964
Dear Expert:
Hello! Recently purchased the C-GANG-TI programmer. The latest version of the software X-ProARM-2v94-Setup is installed. When programming MSP430G2332 today, I encountered the problem that the online state can be programmed with software, but the offline state cannot be programmed (using the green button). Please see the photo for details.
After each press, the name of the MCU changes from MSP430G2332 to MSP430F110. See Hongqiao in the photo. There are also small videos for reference. Thank you!
The above two figures show that it can be used normally when online.
ERROR Before
After
(function(id, html, mimeType)
{
var v = document.getElementById(id + ‘_html5’),
checkVideo = function() {
if (!v.canPlayType || v.error || v.canPlayType(mimeType) == ”) {
var offset = 0;
while (v.childNodes.length > offset) {
if (v.childNodes[offset].nodeName != ‘SOURCE’) {
v.parentNode.insertBefore(v.childNodes[offset], v);
} else {
offset++;
}
}
v.parentNode.removeChild(v);
} else if (v.readyState == 0) {
window.setTimeout(checkVideo, 250);
}
};
document.getElementById(id + ‘_link’).onclick = function() {
document.getElementById(id).innerHTML = html;
return false;
};
window.setTimeout(checkVideo, 250);
})(‘video_5485a4a1-698d-4f3e-be85-060408c4800e’,’\r\n\u003cobject type=\”video/mp4\” data=\”https://e2echina.ti.com/cfs-filesystemfile/__key/communityserver-discussions-components-files/96/VID20250620135802.mp4?_=638859997349833190\” width=\”320\” height=\”240\”\u003e\r\n\t\u003cparam name=\”src\” value=\”https://e2echina.ti.com/cfs-filesystemfile/__key/communityserver-discussions-components-files/96/VID20250620135802.mp4?_=638859997349833190\” /\u003e\r\n\t\u003cparam name=\”url\” value=\”https://e2echina.ti.com/cfs-filesystemfile/__key/communityserver-discussions-components-files/96/VID20250620135802.mp4?_=638859997349833190\” /\u003e\r\n\t\u003cparam name=\”autostart\” value=\”true\” /\u003e\r\n\t\u003cparam name=\”autoplay\” value=\”true\” /\u003e\r\n\t\u003cparam name=\”enabled\” value=\”true\” /\u003e\r\n\t\u003cparam name=\”uiMode\” value=\”full\” /\u003e\r\n\t\u003cparam name=\”scale\” value=\”tofit\” /\u003e\r\n\t\u003cparam name=\”controller\” value=\”true\” /\u003e\r\n\t\u003cdiv class=\”message error\”\u003e此浏览器不支持此视频。\u003c/div\u003e\r\n\u003c/object\u003e’,’video/mp4′);
Links：
Hello!
We have received your case and the investigation will take some time. Thank you for your patience.
,
Links：
. Are you stating that the programmer is switching to the F110 device itself? Is there an SD card plugged in with that firmware?
Did you download the image into the C-GANG before attempting to use it offline?
,
Links：
The video is appearing white with no visuals.
,
XiaoLiang Gao：
Yes, if you look at the picture, you can see that the file is already in C-GANG, pay attention to the image before the error, the device displays a line "IO1:IR_MASTER_3B(2025-06-20)" is this image.
,
XiaoLiang Gao：
This video is just a dynamic version of the previous picture, merely supporting it.
,
XiaoLiang Gao：
I switched to an MCU-MSP430FR5964, and it didn't work out either, and the phenomenon is the same as above. I feel that the product was launched in a hurry, and the support documentation was not found.
,
Links：
Please refer to version 2.96 on Elprotronic.com, it should contain standalone programming for MSP430
,
XiaoLiang Gao：
Hello! I'm not using an SD/TF card. And the image file has been imported into the programmer, as can be seen in the picture above.
,
XiaoLiang Gao：
Hello! I'm not using an SD/TF card. And the image file has been imported into the programmer, as can be seen in the picture above.
,
XiaoLiang Gao：
Now the latest is version 2.96, which reads MSP430FR5964 correctly, but can't write.
,
XiaoLiang Gao：
Recently, we also contacted the manufacturer of C-Gang. The manufacturer said that C-Gang does not support the flashing of fuses. I wanted to replace the soon-to-be-discontinued mspgang with C-Gang. Now the information on C-Gang is a little scarce; I don't know what TI's plan is next. There is no alternative.
