TI中文支持网
TI专业的中文技术问题搜集分享网站

使用iar for 8051 8.10.1编译simpliciTi1.2.0失败

请问各位大神,我在rebuild  Simple_Peer_To_Peer工程时,出现链接错误,芯片使用cc1110

Error[e16]: Segment PDATA_Z (size: 0 align: 0) is too long for segment definition. At least 0 more bytes needed. The problem occurred while processing thesegment placement command "-Z(XDATA)PDATA_Z,PDATA_I=_PDATA0_START-_PDATA0_END", where at the moment of placement the available memoryranges were "-none-" Reserved ranges relevant to this placement: XDATA:f000-f3fe XSTACK BIT:0-7 BREG BIT:80-87 SFR_AN BIT:90-97 SFR_AN BIT:a8-af SFR_AN BIT:d8-df SFR_ANError while running Linker

Seven Han:

请参考这边帖子:http://e2e.ti.com/support/wireless_connectivity/zigbee_6lowpan_802-15-4_mac/f/158/t/116402?tisearch=e2e-sitesearch&keymatch=Segment%20PDATA_Z%20%28size:%200%20align:%200%29%20is%20too%20long%20for%20segment%20definition.

赞(0)
未经允许不得转载:TI中文支持网 » 使用iar for 8051 8.10.1编译simpliciTi1.2.0失败
分享到: 更多 (0)