TI中文支持网我在调试中用GPIO11和GPIO12作为中断，对应中断14和15，两个中断分别使能，都可以进入中断服务程序。但两个中断同时使能，只能进入其中一个int14中断服务程序，另外一个不能进入。请教一下是什么问题？谢谢！
whj sony：
问题已解决，由于两个中断的触发间隔很短，在调试时断点监测不允许。要全速工作就没问题了，还是调试方法问题。
,
Nancy Wang：
感谢分享！
TMS320C6678GPIO多中断问题
未经允许不得转载：TI中文支持网 » TMS320C6678GPIO多中断问题
相关推荐
AM62A7-Q1: gpio设置异常- AM6422: How to relocate the Exception Vector Table in the MCU R5
- TMS320C6678: 核0启动核1，核1没有运行起来
- TMS320C6678: TMS320C6678网络中断问题：核0创建任务后Ping失败
- TDA4VM: During DSP6678 debugging, after creating a print test task on Core 0, the previously functional network connection was interrupted with the error: Destination Host Unreachable.
- AM62P: The issue of poor performance when the MNN(alibaba Mobile Neural Network) inference framework calls the GPU for inference via OpenCL.
- TMS320C6678: C6678CSL库EDMA3的AB同步传输无法启用除0通道以外的别的通道
- AM6442: [IPC RPMSG] Message send to remote core 5 @ 16 end point truncated due to lack of space in vring buffer !!!
![AM6442: [IPC RPMSG] Message send to remote core 5 @ 16 end point truncated due to lack of space in vring buffer !!!-TI中文支持网](https://www.ti2k.com/wp-content/uploads/ti2k/DeyiSupport_DSP_pastedimage1753265713483v1.jpg)